Product Description
AQUAPLY-F consists of a top single-layer base laminated to a bottom double-layer base. The proven 1+2 construction is supplied where high void volume, compaction resistance and maximum water handling are required.
Applications
- Suction pick-up positions of tri-nip machines for finer paper and applications where sheet smoothness is critical.
- Second/third press positions of bi-nip and third/fourth positions of tri-nip machines.
- Third press of tri-nip machines for writing, printing and newsprint, with or without shoe press.
- Highly loaded presses up to 350 kg/cm producing liner kraft and board.
Advantages
- Very high dewatering level and consistent dewatering through life.
- Void-volume retention under high nip load.
- Excellent resistance to sheet and roll marking.
- Good sheet smoothness and high sheet quality.
- Excellent water handling and wear resistance.
Features
- Higher base-fabric composition than conventional laminated felt.
- Steady-state performance.
- High compaction resistance.
- Uniform pressure distribution and high void volume.
Technical Specifications
| Permeability | 30–70 CFM |
| Basis weight | 1650–1900 GSM |
| Caliper | 3.5–4.1 mm |
| Weave | Laminated twin base 1+2 |
| Treatment | Pre-compaction and wetting-up |